Step one of this DIY seat is to make the bench body out of the wood panels. Use your wooden glue to attach two panels forming a nook. You’ll be able to then screw within the nook braces to safe the construction. Repeat this to connect the opposite panel to the facet reverse of the primary panel — forming a bench form. It’s possible you’ll wish to put your 2×6 wood block in between the panels to maintain them upright because the glue dries.
Use the staple gun to tightly safe the material to the underside of the bench. Then, wrap material throughout your 2×6 wood block — this would be the brace that goes between the bench legs. Take the wrapped brace and slide it tightly into the hole between the legs. Insert screws from the surface of the bench (the unlined half) and safe the brace.
Subsequent, put the liner material the other way up on one fringe of the bench seat and staple it. Place a pool noodle alongside the sting, fold the material over the noodle, after which snuggly staple it down alongside each the seat and legs of the bench. Proceed this along with your different pool noodles till the complete bench is stuffed with cloth-covered noodles. Once you’re carried out, trim and staple down any extra material. And identical to that, you will have new out of doors patio furnishings to revamp your area, all for the low price of wooden, material, and pool noodles.